28.06.2016 NEXUS Online Diag Status fail

Команда show module показала fail для 5 модуля:

n7k# show module 5 
Mod  Ports  Module-Type                         Model              Status
---  -----  ----------------------------------- ------------------ ----------
5    48     1/10 Gbps BASE-T Ethernet Module    N7K-F248XT-25E     ok

Mod  Sw              Hw
---  --------------  ------
5    6.2(2a)         1.3     



Mod  MAC-Address(es)                         Serial-Num
---  --------------------------------------  ----------
5    04-6c-9d-32-40-94 to 04-6c-9d-32-40-c7  JAE193500A0

Mod  Online Diag Status
---  ------------------
5    Fail

Chassis Ejector Support: Enabled 
Ejector Status: 
Left ejector CLOSE, Right ejector CLOSE, Module HW does support ejector based shutdown, Ejector policy enabled.

Это вылечилось отменой результатов теста и проведением повторного теста:

n7k# show diagnostic content module 5

Module 5: 1/10 Gbps BASE-T Ethernet Module  

Diagnostics test suite attributes: 
B/C/* - Bypass bootup level test / Complete bootup level test / NA 
P/*   - Per port test / NA 
M/S/* - Only applicable to active / standby unit / NA 
D/N/* - Disruptive test / Non-disruptive test / NA 
H/O/* - Always enabled monitoring test / Conditionally enabled test / NA 
F/*   - Fixed monitoring interval test / NA 
X/*   - Not a health monitoring test / NA 
E/*   - Sup to line card test / NA 
L/*   - Exclusively run this test / NA 
T/*   - Not an ondemand test / NA 
A/I/* - Monitoring is active / Monitoring is inactive / NA 

                                                       Testing Interval
ID     Name                               Attributes      (hh:mm:ss) 
____   __________________________________ ____________   _________________ 
 1)    ASICRegisterCheck------------->     ***N******A     00:01:00
 2)    PrimaryBootROM---------------->     ***N******A     00:30:00
 3)    SecondaryBootROM-------------->     ***N******A     00:30:00
 4)    EOBCPortLoopback-------------->     C**N**X**T*     -NA-
 5)    OBFL-------------------------->     C**N**X**T*     -NA-
 6)    PortLoopback------------------>     *P*N***E**A     00:15:00
 7)    RewriteEngineLoopback--------->     *P*N***E**A     00:01:00
 8)    SnakeLoopback----------------->     *P*N***E**A     00:20:00
 9)    FIPS-------------------------->     *P*NO*XE*T*     -NA-
10)    BootupPortLoopback------------>     CP*N**XE*T*     -NA-

n7k# diagnostic clear result module 5 test 1
n7k# diagnostic clear result module 5 test 2
n7k# diagnostic clear result module 5 test 3
n7k# diagnostic clear result module 5 test 6
n7k# diagnostic clear result module 5 test 7
n7k# diagnostic clear result module 5 test 8

diagnostic start module 5 test all 

n7k# show module 5
Mod  Ports  Module-Type                         Model              Status
---  -----  ----------------------------------- ------------------ ----------
5    48     1/10 Gbps BASE-T Ethernet Module    N7K-F248XT-25E     ok

Mod  Sw              Hw
---  --------------  ------
5    6.2(2a)         1.3     



Mod  MAC-Address(es)                         Serial-Num
---  --------------------------------------  ----------
5    04-6c-9d-32-40-94 to 04-6c-9d-32-40-c7  JAE193500A0

Mod  Online Diag Status
---  ------------------
5    Pass

Chassis Ejector Support: Enabled 
Ejector Status: 
Left ejector CLOSE, Right ejector CLOSE, Module HW does support ejector based shutdown, Ejector policy enabled.